Protractors (360°)

Universal Protractor No. 93

With Fine Adjustment

  • Parallax-error correction (vernier and scale are on one level, which largely eliminates reading errors)
  • Nonglare reading
  • Stainless steel
  • Hardened measuring edges
  • Panorama magnifier
  • Additional square
  • Packed in case

The measuring arm can be replaced and adjusted over its entire length.

 

Dial graduation ° 4 x 90°
Readingiaccuracy   1/12° = 5 arc minutes
Arm length mm 150 / 200 / 300
Net weight kg 0.380
Order number   931106
     
Spareiarmi150imm Order no.: 930001
Spareiarmi200imm Order no.: 930002
Spare arm 300 mm Order no.: 930003

 


Universal Protractor No. 119

High-Precision Design with Fine Adjustment

  • Parallax-error correction (vernier and scale are on one level, which largely eliminates reading errors)
  • Nonglare reading
  • Stainless steel
  • Hardened measuring edges
  • Panorama magnifier
  • Packed in wooden case

The measuring arm can be replaced and adjusted over its entire length.

 

Dial graduation ° 4 x 90°      
Readingiaccuracy   1/12° = 5 arc minutes
 
           
Size   1 2 3 4
Arm length mm 150 200 300 500
Net weight  kg 0.265 0.270 0.280 0.300
Order number   1191101 1191102 1191103 1191104
 
Spare arms Order no.: 1190001 1190002 1190003 1190004
Wooden case Order no.: 1195301 1195302 1195303 1195304

Digital Universal Protractor No. 120

With Electronic Angle Measurement

Electronic angle measurement and digital display ensure very high accuracy and reliable readings.

  • Baseplate and measuring arms made of stainless steel
  • Hardened measuring edges
  • Fine adjustment
  • Quick clamping of the measuring arm
  • Simple adjustment or zero setting on any flat surface
  • Packed in case

Reading:

  • 1 arc minute / 0.01 angular degrees
  • Mode switch allows reading both in decimal degrees and arc minutes
  • Large LCD display (8.5 mm)
  • Accuracy: ± 2 arc minutes
  • Measurement ranges: 1 x 360°, 2 x 180°, or 4 x 90°
  • Zero setting (RESET) possible in any position
  • Power supply: 1 lithium coin cell battery 3 V
  • The instrument can be connected to a peripheral device using a proximity cable (RS / USB) or Power-RS (Power-USB)
     

 

Size   1 2 3 4
Arm length mm 150 200 300 500
Net weight kg 0.370 0.375 0.380 0.390
Orderinumber   1201101 1201102 1201103 12011014
Spare arms Order no. 12047101 12047102 12047103 12047104

 

Conncetion cable for printer and measured value printer on request.


Digital Universal Protractor No. 1201106

With Electronic Angle Measurement

Electronic angle measurement and digital display ensure very high accuracy and reliable readings.

  • Baseplate and measuring arms made of stainless steel
  • Packed in sturdy aluminum case

Accessories:

  • Reference square 60 x 50 mm for adjustment, zero setting, and presetting measured values
  • 1 clampable additional square (90°) for measuring the smallest angles
  • 2 measuring arms (150 + 300 mm) 

Reading:

  • Large LCD display with 2-line display
  • At the top, the measured value appears in angular degrees with decimal places
  • At the bottom, the measured value appears in degrees / arc minutes / arc seconds
  • Device accuracy: +/- 5 arc minutes
  • Tested and calibrated: +/- 2 arc minutes
  • Data output: RS 232 compatible
  • Selectable measurement ranges: 0-360°, 0-180°, 0-90°
  • Power supply: 3 V lithium, type CR 2032

 

Arm length mm 150 + 300 150 300
Net weight kg 0.350    
Order number   1201106    
Spare arms Orderino.   12047105 12047106

 

Accessories for Universal Protractors

V-Block-Base

  • V-shaped bottom
  • Finely ground on all sides
  • For vertically clamping the universal protractor for measurements on the reference plane

 

V-block base foriprotractorino. 119 120
Order number 1231001 1231002

Acute-Angle Attachment

  • Special accessory for universal protractors
  • To be placed on the measuring edge of the protractor
  • For measuring the smallest angles from 0°
Lengthimeasuringiarm mm 75
Order number   1221000